12mm = almost 15/32 inch (= almost 1/2 inch) 13mm = just over 1/2 inch.
Hereof, What size is 19mm?
MM | Approximate Size In Inches | Exact Size In Inches |
---|---|---|
17mm | Just short of 11/16 Inch | 0.66929 Inches |
18mm | Just short of 3/4 Inch | 0.70866 Inches |
19mm | Little under 3/4 Inch | 0.74803 Inches |
20mm | Just short of 13/16 Inch | 0.78740 Inches |
What is 7mm in standard? SAE to Metric Conversion Chart
SAE | Metric | Inch |
---|---|---|
7mm | 0.276 | |
9/32″ | 0.281 | |
5/16″ | 0.313 | |
8mm | 0.315 |
• Apr 29, 2020
Additionally Is 8mm bigger than 3 8? 8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch. … 19mm = 3/4 inch.
Is a 3/8 socket the same as a 10mm? So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
What is 22mm in standard?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
22mm | 7/8″ | |
5/8″ | 24mm | 15/16″ |
25mm | 1″ | |
3/4″ | 29mm | 1-1/8″ |
• Apr 9, 2020
What is 20mm in standard? SAE to Metric Conversion Chart
SAE | Metric | Inch |
---|---|---|
20mm | 0.787 | |
13/16″ | 0.813 | |
21mm | 0.827 | |
27/32″ | 0.844 |
• Apr 29, 2020
What size is 27mm in standard? Wrench Size And Conversion Table
Inches | Millimeters | Spanner |
---|---|---|
1.024 | 26mm | 26mm |
1.063 | 27mm | 1 1/16 AF ; 27mm |
1.100 | 5/16 Wworth; 11/16 BSF | |
1.125 | 1 1/8 AF |
What is 8mm in standard?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
1/8″ | 8mm | 5/16″ |
3/16″ | 10mm | 3/8″ |
1/4″ | 11mm | 7/16″ |
5/16″ | 13mm | 1/2″ |
• Apr 9, 2020
Also What size is a 10mm socket? Standard / Metric Wrench Conversion Chart
Bolt Diameter | Standard | Metric |
---|---|---|
3/16″ | 3/8″ | 10mm |
1/4″ | 7/16″ | 11mm |
5/16″ | 1/2″ | 13mm |
3/8″ | 9/16″ | 14mm |
• Aug 26, 2019
What is 8mm in fraction?
Decimal | Fraction | Metric |
---|---|---|
0.0787 | 8 mm | |
0.0938 | 3/32 | 8.73 mm |
0.1181 | 9 mm | |
0.1250 | 1/8 | 9.525 mm |
What is bigger half inch or 3 8? 0.5 is greater than 0.375 which also means that 1/2 is greater than 3/8.
What is 3mm in inches fraction?
Millimeters | Inches | Inches |
---|---|---|
3mm | 3/32 Inch | 5/8 Inch |
4mm | 1/8 Inch | Just under 11/16 Inch |
5mm | 3/16 Inch | Just under 3/4 Inch |
6mm | Just under 1/4 Inch | Just over 3/4 Inch |
What is 10 mm in fractions?
Millimeters to inches conversion table
Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
---|---|---|
9 mm | 0.3543 ″ | 23/64 ″ |
10 mm | 0.3937 ″ | 25/64 ″ |
20 mm | 0.7874 ″ | 25/32 ″ |
30 mm | 1.1811 ″ | 1 3/16 ″ |
What size is a bolt with a 10mm head? Metric Shoulder Bolt Dimensions
Shoulder Diameter (A) | Thread (C) | Head Diameter (E) |
---|---|---|
6mm | 5mm x 0.8 | 10mm |
8mm | 6mm x 1.0 | 13mm |
10mm | 8mm x 1.25 | 16mm |
12mm | 10mm x 1.5 | 18mm |
What do you use a 10mm socket for? In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.
What are the sizes of metric wrenches?
Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes. Metric Flare Nut Wrenches (9, 10, 11, 12, 13, 14, 15, 17) Note: Each wrench may combine two sizes.
How do I figure out my wrench size? To calculate the wrench size needed, you must first measure your bolt. Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly.
What is the conversion from metric to inches?
Since there are 25.4 millimeters in one inch, the length in inches is equal to millimeters divided by 25.4. Thus, the formula to convert millimeters to inches is the length divided by 25.4.
What size is a 36mm socket in standard? A 36mm socket is 1 7/16″ in standard(SAE) size, almost.
What is equivalent to a 21mm socket?
Standard / Metric Wrench Conversion Chart
Bolt Diameter | Standard | Metric |
---|---|---|
9/16″ | 13/16″ | 21mm |
7/8 ” | 22mm | |
5/8″ | 15/16″ | 24mm |
1″ | 25mm |
• Aug 26, 2019
What is a 28mm socket in standard? This Metric Standard Length Socket has a 28mm socket size. 3/4″ Drive. 12 Point.
What size is 30mm in inches?
Millimeters to inches conversion table
Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
---|---|---|
30 mm | 1.1811 ″ | 1 3/16 ″ |
40 mm | 1.5784 ″ | 1 37/64 ″ |
50 mm | 1.9685 ″ | 1 31/32 ″ |
60 mm | 2.3622 ″ | 2 23/64 ″ |