How Much Does a Dump Truck Load of Gravel Cost?
Ah, the age-old question: “How much does a dump truck load of gravel cost?” It’s like trying to guess how many jelly beans are in a jar – except, instead of sweets, we’re dealing with tons of gravel! Let’s dive into this rocky topic and unearth all the valuable nuggets you need to know.
Now, when it comes to the cost of a dump truck load of gravel, the price range can vary quite a bit. Typically, you’re looking at around $10 to $50 per ton or $15 to $75 per yard. If we break it down further, that’s roughly $1 to $3 per square foot. But wait for it… you might also encounter a flat rate of around $1350 per dump truckload. Phew! That’s a whole lot of gravel and price options packed into one!
Now let’s tackle some common queries that pop up alongside this hefty topic:
How far will 5 tons of gravel spread? Picture this: 5 tons of gravel can cover approximately 540 square feet or 60 square yards for your garden or driveway makeover extravaganza.
Ever wondered how much gravel a dump truck can hold? Larger trucks are beasts and can lug around about 14 tons of gravel. On the other hand, smaller trucks handle around 6.5 to 7.5 tons – not too shabby either!
Next up – ever guessed how much dirt your good ol’ pickup can carry? Well, full-size pickups usually strut their stuff with holding up-to-the-task loads like 2 cubic yards of soil or 1 cubic yard of stone/gravel.
Hey now, don’t skip out on wondering about practical tips and insights too:
Fact: Did you know that knowing your measurements is key? When shopping for landscaping rocks or mulch bags for your backyard project matching your area dimensions and depth requirements will save you time and money – no excess rocks left behind!
With these handy tips in mind, why not test out your knowledge by estimating how many bags… No Spoilers Continue reading in the coming sections for more fun facts!
Factors Affecting the Price of Gravel
When we delve into the factors influencing the price of gravel, it’s like navigating a bumpy road full of surprises. Let’s uncover the mysteries surrounding this gritty world, shall we? Pea gravel comes in various amounts, with prices fluctuating depending on your needs. For instance, one ton of pea gravel could set you back anywhere from $10 to $50. However, if you’re eyeing a full truckload, be prepared to dish out between $250 and $500 – quite the investment for a load of stones! On the other hand, if you prefer smaller quantities, one cubic yard might cost you anywhere from $15 to $75 per chunky yardstick. And don’t overlook those handy bags of gravel; they usually range from $4 to $6 per bag – a convenient option for smaller projects or patch-ups.
Now let’s shift gears and explore how much gravel is actually packed into that gigantic dump truck rolling by. Larger dump trucks can haul an impressive 14 tons of gravel on average – that’s like carrying an entire small mountain on wheels! In contrast, their smaller counterparts can manage around 6.5 to 7.5 tons but still hold their weight in stone.
Curious about estimating how much area your pile of gravel will cover? A single ton typically blankets about 100 square feet at a depth of 2 inches or around 60 square feet at a more generous 4-inch depth – giving you plenty of room to spread those rocky riches in your garden or driveway makeover.
And what about tandem loads? These double trouble trucks (with two axles in the back) can transport a hefty load ranging from 15 to 18 tons – depending on their volume capacity and how much stone they’re willing to lug around.
So next time you’re pondering over pebbles and prices for your landscaping extravaganza or DIY project, keep these figures in mind before diving headfirst into the sea of pebbles and stones! With these insights under your belt, you’ll be rockin’ and rollin’ through your next gravel quest with confidence!
How to Calculate Gravel Coverage and Volume
To calculate gravel coverage, you can start by measuring the driveway in cubic feet. Multiply the length by the width by the depth. If you need to convert this measurement to cubic yards, simply divide the total cubic feet by 27. One cubic yard of gravel equals around 1.13 tons, so you can multiply your cubic yard measurement by 1.13 to get an estimate in tons.
Now, let’s delve into how much area one ton of gravel typically covers. As a rule of thumb, one ton of gravel generally blankets about 100 square feet at a depth of 2 inches. This coverage decreases as the depth increases: about 80 square feet at a 3-inch depth and around 60 square feet at a 4-inch depth.
If you’re looking to calculate gravel coverage in square meters, considering a driveway should ideally be at least 50mm deep, one ton of gravel would cover approximately 14 square meters.
When it comes to determining the volume of a ton of gravel, it’s essential to note that a ton (equaling around 2,000 lbs.) typically occupies roughly 25 cubic feet – slightly less than a cubic yard. The actual coverage will depend on how thick or deep you plan on spreading the gravel; for instance, an average driveway with gravel is usually spread out at a depth of around 4 inches.
For accurate estimations tailored to your specific project requirements and dimensions, consider using online tools like a gravel calculator. These handy calculators can help you quickly estimate how much volume (in cubic ft., cubic yards, or cubic meters) or weight (tons and pounds) of gravel you’ll need for your earthworks or landscaping endeavors.
So next time you’re puzzling over how much gravel you need for that driveway revamp or landscaping project – armed with these calculation tips and tools – you’ll be able to tackle those numbers with ease and precision!
Types of Gravel and Their Costs
When it comes to the cost of different types of gravel, prices vary depending on the quantity you need. For pea gravel, expect to pay between $10 to $50 for one ton. If you’re eyeing a full truckload, be prepared to shell out between $250 and $500 for that mountain of stones. On the other hand, if you’re considering smaller quantities like one cubic yard, costs can range from $15 to $75 per yard or around $4 to $6 per bag – making it a convenient option for smaller projects or touch-ups.
Now, let’s talk about how much area one ton of gravel typically covers. Picture spreading one ton over your driveway or garden – it can blanket approximately 100 square feet at a 2-inch depth. As you increase the depth to 3 inches or 4 inches, the coverage area decreases slightly but still gives you ample room to spread those rocky riches
When it comes to hauling all that gravel around, larger dump trucks are the real MVPs as they can carry an impressive 14 tons on average! On the flip side, their smaller counterparts handle around 6.5 to 7.5 tons – still no small feat in the world of stones.
If you’re on the lookout for budget-friendly options for driveways, consider pea gravel along with crushed granite and steel slag as some of your cheapest gravel choices. These options not only save you money but also add a touch of variety and texture to your outdoor spaces without breaking the bank.
Next time you’re pondering over pricing or scouting for various types of gravels in Toronto, Vaughan & GTA areas – keep these price ranges in mind before diving headfirst into your next landscaping project! Don’t forget that getting quotes from multiple suppliers is crucial in ensuring you get the best price possible. And remember: with great gravel comes great responsibility (to your wallet)!
How much does a dump truck load of gravel cost?
A dump truck load of gravel typically costs around $1350.
How much area does 5 tons of gravel cover?
5 tons of gravel can cover around 540 square feet or 60 square yards for a standard 2-inch depth.
How many tons of gravel can a dump truck hold?
Typically, larger dump trucks can carry about 14 tons, while smaller ones can transport around 6.5 to 7.5 tons.
How many yards are in a ton of gravel?
There are approximately 0.66 cubic yards in a ton of gravel.