5mm = ho feta 3/16 inch. 6mm = hoo e ka bang 1/4 inch. … 10mm = feela ka intshi ea 3/8.
Ka mokhoa o ts'oanang, Ke limilimithara tse kae ka inch le kotara? Tafole ea phetoho ea lisenthimithara ho isa ho limilimithara
Lisenthimithara (“) | Limilimithara (limilimithara) |
---|---|
1/8 p. | 3.175 limilimithara |
1/4 p. | 6.35 limilimithara |
1/2 p. | 12.7 limilimithara |
1″ | 25.4 limilimithara |
18mm ka standard ke eng? SAE ho Chate ea Phetoho ea Metric
SAE | Metric | senthimithara |
---|---|---|
18mm | 0.709 | |
23 / 32 " | 0.719 | |
19mm | 0.748 | |
3 / 4 " | 0.75 |
• La 29 Mmesa, 2020
Ke limilimithara tse kae tse bolelang 1 intshi? 1 intshi = Limilimitara tse 25.4.
Ea bobeli 10mmm ke eng? 10mm Auto (10×25mm, lebitso la semmuso la CIP: 10mm Auto, lebitso la semmuso la SAAMI: 10mm Automatic) ke Cartridge e matla ea semi-automatic pistol E qalile ho hlahisoa ke US Marine Jeff Cooper mme ea hlahisoa ka 1983 ka sethunya sa Bren Ten.
Sekoti ea 14mm e boholo bo bokae?
Chate ea Phetoho ea standard / Metric Wrench
Bolt bophara | Standard | Metric |
---|---|---|
1 / 4 " | 7 / 16 " | 11mm |
5 / 16 " | 1 / 2 " | 13mm |
3 / 8 " | 9 / 16 " | 14mm |
7 / 16 " | 5 / 8 " | 16mm |
• La 26 Aug, 2019
ebe dn25 ke boholo bofe? LIEKETSENG
Bophara ka lebitso DN (limilimithara) | Ka lebitso Pipe Size NPS (lisenthimithara) | Ka ntle bophara (OD) lisenthimithara (mm) |
---|---|---|
15 | 1/2 | 0.840 ho (21.34 limilimithara) |
20 | 3/4 | 1.050 ho (26.67 limilimithara) |
25 | 1 | 1.315 ho (33.40 limilimithara) |
32 | 1 1 / 4 | 1.660 ho (42.16 limilimithara) |
Na 18mm e tšoana le 3 4? Lintho tse nyane hangata li lekantsoe ka limilimithara kaha ke tekanyo e nepahetseng haholoanyane.
...
MM | Boholo ba Inches | Boholo bo Hantle ka Lisenthimithara |
---|---|---|
18mm | E haufinyane feela ka lisenthimithara tse 3/4 | 0.70866 inches |
19mm | Nyane tlasa 3/4 Inch | 0.74803 inches |
20mm | E haufinyane feela ka lisenthimithara tse 13/16 | 0.78740 inches |
21mm | Ka tlase ho 13/16 Inch | 0.82677 inches |
Ke eng e lekanang le soketeng ea 22mm?
Chate ea Phetoho ea Metric / Standard Wrench
Bolt bophara | Metric | Standard |
---|---|---|
22mm | 7 / 8 " | |
5 / 8 " | 24mm | 15 / 16 " |
25mm | 1 " | |
3 / 4 " | 29mm | 1-1 / 8 ″ |
• La 9 Mmesa, 2020
Sokete ea 36mm ka boholo bo tloaelehileng ke eng? Sokete ea 36mm ke 1 7/16 likhato ka boholo bo tloaelehileng(SAE), hoo e ka bang. 1 7/16 ″ e fetoloa hore e be sokete ea 1 7/16 ke sokete e tloaelehileng e lekanang hantle ka ho fetisisa se tiisang 36mm.
Boholo ba 19mm ke bofe?
MM | Boholo ba Inches | Boholo bo Hantle ka Lisenthimithara |
---|---|---|
17mm | E haufinyane feela ka lisenthimithara tse 11/16 | 0.66929 inches |
18mm | E haufinyane feela ka lisenthimithara tse 3/4 | 0.70866 inches |
19mm | Nyane tlasa 3/4 Inch | 0.74803 inches |
20mm | E haufinyane feela ka lisenthimithara tse 13/16 | 0.78740 inches |
100mm ka lisenthimithara tse kae? Karabo: 100 mm ke Lisekoere tsa 3.93
Inchi ke karolo ea bolelele ba 'muso.
Ke lisenthimithara tse kae hantle?
Tlhaloso: 1 inch e batla e lekana le Lisentimitara tse 2.54. Ka mokhoa oa bonngoe, lisenthimithara tse 12 = 30.48 centimeters, empa e bontša feela 30 cm ho 'musi.
Ke eng e matla ho feta 10mm kapa 45?
10mm ke khatriji ea lehong e betere. E fana ka matla a fetang. 45 ACP (leha . 45 Super e lekana le yona) mme e na le tsela e bataletseng; esita le .
Ho na le 10mm Glock? Tee Mokhahlelo 20 ka 10mm e fana ka litima-mollo tse kholo. Tšebeliso ea "recoil-damping Glock hi-tech polymer" e fokotsa ho khoehlisa haholo. Ka matla a molomo a 750 Joule le makasine ea boholo ba li-round tse 15, ke molekane ea tšepahalang ho tsomong e 'ngoe le e 'ngoe. E lumella setšoantšo se sireletsehileng le se nepahetseng sa ho qetela leha u tsoma papali e kholo.
Boholo ba 7mm ke bofe?
MM | Boholo ba Inches | Boholo bo Hantle ka Lisenthimithara |
---|---|---|
5mm | 3/16 lisenthimithara | 0.19685 inches |
6mm | E haufinyane feela ka lisenthimithara tse 1/4 | 0.23622 inches |
7mm | Ka tlase ho 1/4 Inch | 0.27559 inches |
8mm | 5/16 lisenthimithara | 0.31496 inches |
A na nka sebelisa sokete ea lintlha tse 12 holim'a nate ea lintlha tse 6?
Qetello ea lintlha tse 12 ke li-hexagon tse peli (ka linako tse ling li bitsoa "double-hex") - e na le lintlha tse 12, kapa li-vertices, tse arohaneng ka ho lekana ka likhato tse 30 tse pota-potileng selikalikoe. Geometry ena e tla lekana le sehatelo sa lintlha tse 6. ... Haeba fastener ea hau e le lintlha tse 12, e leng ntho e sa tloaelehang, joale u tlameha ho sebelisa lintlha tse 12. sesebelisoa.
17mm ka standard ke eng? SAE ho Chate ea Phetoho ea Metric
SAE | Metric | senthimithara |
---|---|---|
16mm | 0.63 | |
21 / 32 " | 0.656 | |
17mm | 0.669 | |
11 / 16 " | 0.688 |
• La 29 Mmesa, 2020
Ke eng e lekanang le sokete ea 36mm?
Boholo ba Wrench le Tafole ea Phetoho
Li-inch | Tse limilione | Spanner |
---|---|---|
1.390 | 13/16 Bohlokoa; 15/16 BSF | |
1.417 | 36mm | 36mm |
1.418 | 1 7/16 AF | |
1.480 | 7/8 Wworth; 1B BSF |
19mm ka lisenthimithara tse kae? Chate ea phetoho ea SAE ho Metric
SAE | Metric | senthimithara |
---|---|---|
23 / 32 " | 0.719 | |
19mm | 0.748 | |
3 / 4 " | 0.75 | |
25 / 32 " | 0.781 |
• La 29 Mmesa, 2020
DN40 e bolela'ng?
Lentsoe kapa poleloana ea Senyesemane: DN40. Karabo e khethiloeng: Bophara ba lebitso (nomoro ke bophara ba bore bo lekantsoeng ka limilimithara)
DN20 ke eng? Boholo ba phala ka lebitso: DN20. Tekanyetso: EN10220. Ka hare ho bophara ba [mm] Botenya ba lebota [mm] Boima ka bolelele ba yuniti [kg/m]
dn25 e bolela'ng?
NPS kapa DN li emela hokae?
Bophara ka lebitso DN (limilimithara) | Ka lebitso Pipe Size (lisenthimithara) | Ka ntle bophara (OD) lisenthimithara (mm) |
---|---|---|
20 | ¾ | 1.050 ho (26.67 limilimithara) |
25 | 1 | 1.315 ho (33.40 limilimithara) |
32 | 1 1⁄4 | 1.660 ho (42.16 limilimithara) |
40 | 1 ½ | 1.900 ho (48.26 limilimithara) |